News

Inspection Hatches professional fitted
by: admin
9 March 2016
Today one our engineers fitted inspection hatches, due to a gas regulation stating all boiler flues should be accessible during inspection. During a Gas Safety Check and engineer needs to visually see the seals of a boiler flue to check if any are broken which potentially leak CO, which is very dangerous. Sometimes flue can […]
Gas Leak Repair
by: admin
2 March 2016
Today, one of our gas engineers was booked to attend a gas leak in East London. Prior to our visit, the customer tried several other gas companies but all failed to identify where the leak was. ‘Alkan’ one of our most experienced gas leak repairers successfully found the gas leak using a ‘bubble technique’. Yes […]
Happy Customer : Gas Safety Certificate
by: admin
1 March 2016
Another happy customer who used our gas safety certificate services. [vsw id=”YpBxf6JCgyI” source=”youtube” width=”425″ height=”344″ autoplay=”no”] Find out more about our gas safety certificate services
Gas Hob Install in SE22
by: admin
26 February 2016
One of our specialist gas hob fitters called Adeel, today installed a gas hob and pipework to a very high standard. All our gas engineers are cherry picked to be the best installers in London. The pictures below show his attention to detail and accuracy with his installs. Another happy customer !!! – Well done.
Inspection hatches installed in E14
by: admin
10 February 2016
Today we installed 3 inspection hatches so that a landlord meet gas safety regulations. After carrying out a gas safety certificate last week her boiler flue covered by a plastered ceiling. Gas Safe registered engineers need to be able to see the flue − which take fumes away from the boiler − as part of essential […]
Strip and Clean in N18
by: admin
5 February 2016
One of our gas engineers performed a strip and clean on a boiler to ensure it is working efficiently. This included a full strip down and clean of the condensate trap, combustion chamber, burner and heat exchanger. After the strip and clean the emissions of the boiler dropped to safe levels and also a low […]
Power Flush in DA8 3BE
by: admin
25 January 2016
An engineer carried out a Power Flush on Saturday in DA8 3BE. The customer was over the moon as it was half the price from the original company who proposed to do the work. Also the engineer also fixed a few snags on the boiler to ensure it runs more efficiently. A very happy customer […]
Strip and clean
by: admin
22 January 2016
One of our gas engineers today performed a ‘strip and clean’. The client was advised to get this done after a gas safety certificate was carried out a few days ago. During the gas safety check the engineer obtained high co readings and when opening the boiler it was evident the seal on the gasket […]
Shower Mixer Change in SE1
by: admin
11 January 2016
On Saturday, one of our plumbers changed a shower mixer. Our clients who has used us for several years to do gas safety certificates and repairs was very happy with the workmanship and how professional the engineer was on the day.  
Gas Safety Certificates: Some Things You Should Know
by: admin
8 December 2015
Landlords, based on existing laws of the land, and as a way of protecting the welfare of the tenants, are required to abide with existing laws concerning the operations of their properties that are available for rent or lease. Among others, landlords will be greatly responsible for the safety of their tenants. Therefore, it is […]